TSXDEZ12D2 Schneider Relay Module
TSXDEZ12D2 is a programmable logic controller (PLC) module launched
by Schneider Electric, belonging to its Micro series. It adopts a
discrete input design and supports 24V DC input. It is connected in
a half height format through screw terminal blocks and can be
configured as discrete input, latch input, event triggered input,
or up/down counter input. It is suitable for signal acquisition and
processing tasks in industrial automation control scenarios. Its
modular design facilitates system integration and expansion, and
can be used in conjunction with other components of Schneider PLC
series to build a complete automation control system.
Technical specifcations for TSXDEZ12D2
Input features: Supports 24V DC input, with half height format
connection achieved through screw terminal blocks. The input can be
configured as discrete input, latch input, event triggered input,
or up/down counter input, among other functional modes.
Configuration flexibility: The first four inputs of the discrete
I/O module on the first slot of the TSX Micro PLC can be configured
with functions as needed, for example, inputs that can be
configured as latch inputs include inputs% I1.0 to% I1.3; The
inputs that can be configured as event triggered inputs include
inputs% I1.0 to% I1.3; The inputs that can be configured as up and
down counter inputs include inputs% I1.0 to% I1.3. Depending on the
specific software configuration, up to 2 up/down counter channels
can be created on these inputs, and each channel can independently
complete operations such as up/down counting, bidirectional
counting, etc., with or without direction discrimination.
Control and Backup: Input% I1.8 can be set to control the RUN/STOP
commands of the PLC, with control on the rising edge, and the stop
command on the input has higher priority than the run command sent
from the terminal or network; Input% I1.9 can be set on the rising
edge to backup the application program in the flash EPROM (in
internal RAM) and up to 1000 words of% Mwi.
Alarm output: On the PLC body unit, the output% Q2.0 can be
configured to achieve alarm function. When the PLC is in operation
and no errors are detected, the alarm output status is 1. It can be
used for external safety circuits of the PLC, such as controlling
the power output of pre actuators or TSX Micro PLC power output.
Wiring method: The screw terminal block connection module is
equipped with a cover to ensure accurate installation and safe
operation of the screw. Each terminal on the screw terminal block
can be connected through bare wire, cable end wire, or wire on a
closed/open tap. The capacity of each terminal is up to 2 1mm ²
(AWG 17) with cable end, or 1 1.5mm ² (AWG 15) without cable end,
or 1 open or closed 1mm ² tap (AWG 17).
More Products In Stock:
ATV320U06N4B | ATV320U02M2B | ATV320U07M2B | ATV320U07M2C |
ATV320U07N4B | ATV320U07N4C | ATV320U11M2B | ATV320U11M2C |
ATV320U11N4B | ATV320U11N4C | ATV320U15M2B | ATV320U15M2C |
Our Services:
1,All our products are new and orginal, and of good quality
2,Our prices are very competitive.
3, We have a large quantity in stock, so we could help the
customers to get the components which are dificult to get.
4,All inquiries will be valued and will reply in 24.
Packing & Delivery:
1,100% brand New and Original Factory Seal!
2,Warranty:1 year
3,Package: Original packing with cartons.
4,Delivery time: Shipped in 3-7 days after payment
5,All the goods will be tested before shipment